Can you convert a 25hp pull start mariner outboard to a electric start? - converting pull start outboard to electric start
In theory it is possible, however, conversion kits, are (1) hard to find and (2) a little expensive. You can a used motor for less than the kit. Then there is the current edition of the load circuit. It is very low, with a normal speed for this motor. So if you are looking for accessories for power, not yet have enough power. It is better to put money into a deep cycle battery. You can, by helping to LED lights running, etc., reduce energy consumption. Good Luck1
Monday, February 1, 2010
Converting Pull Start Outboard To Electric Start Can You Convert A 25hp Pull Start Mariner Outboard To A Electric Start?
Subscribe to:
Post Comments (Atom)
2 comments:
Yes, but not very profitable. You will need a starter solenoid and battery cables and high current, high output alternator (in jest, would be 5 amps at 5,000 rpm), the regulator / rectifier switching devices and loom. New this would be a lot of money - if it is still available. As mentioned above, an outline of the starter motor of the same model is a less expensive option. The work is pretty easy, but it is a professional skill. A workshop manual is a necessity.
It is possible to negotiate cheaper and easier to start a model of the standard electric motor.
Yes, there are conversion kits directly from Mercury Marine. Order from your local market, you need as your serial number are 4 different kits. Cost about $ 650.
Post a Comment